このアプリのYoutube動画がある場合はURLを送信してください。詳細 »
APPLICATION INFO - iPhoneアプリの詳細情報
The Duct Calculator App for iPhone/iPad is a modern take on a the classic duct sizing wheel, allowing HVAC engineers, designers and contractors quickly and accurately size a new duct or calculate the performance of an existing duct on your iOS devices.
Size both round and rectangular ductwork with the ease of a traditional Ductulator. Adjust the airflow, diameter, width or height sliders with your thumbs. Get maximum precision by entering numbers directly into the the calculator. Lock friction rate, diameter or width or height to make the calculations you need for your design.
Live update of the calculated values allows you to see the impact of the changes immediately.
Outputs velocity for both round and rectangular ducts.
PERFORM QUICK AND ACCURATE CALCULATIONS:
Enter the airflow and sizes in directly as numbers for maximum precision.
- or -
Use the airflow and size sliders for quick calculations.
Shows live equivalent round/rectangular duct sizes.
Specific dimensions can be locked to allow specific what-ifs to be quickly calculated.
Works for both IP and SI units.
You can select from a range of duct roughness categories.
Designed to allow quick calculations anywhere, anytime, it is ideal for the HVAC designer or contractor.
HOW TO USE:
Locking Dimensions:
The lock symbols to the right of the duct dimensions indicate if that particular dimension is locked when calculating new equivalent values when a dimension is updated.
The Diameter can be locked or unlocked.
The Width or Height can be locked, but not both.
Using the Sliders:
Move the sliders for Airflow, Duct Diameter, Width and Height up and down to match the desired duct size to calculate velocity and pressure drop for.
The Diameter, Width and Height will change such that the equivalent size is shown:
Changing the diameter will updated either the equivalent Width or the Height, depending on which dimension is unlocked.
Changing the Width or Height will update the equivalent Diameter if it is unlocked, or the other rectangular duct dimension of the Diameter size is locked.
Direct Entry:
The values for Airflow, Diameter, Width and Height can be directly edited in the text boxes to allow quick entry of exact numbers.
Invalid entries will generate an error message, and must be corrected prior to the calculations updating.
Output:
The values for the calculated Velocity for Round Duct and Rectangular Duct are shown, as is the Pressure Drop per Length value.
NOTES:
This application (App) is provided for use by qualified HVAC engineers and designers in the design of air handling systems and is not a substitute for appropriate design services.
When in doubt, contact a design professional.
Size both round and rectangular ductwork with the ease of a traditional Ductulator. Adjust the airflow, diameter, width or height sliders with your thumbs. Get maximum precision by entering numbers directly into the the calculator. Lock friction rate, diameter or width or height to make the calculations you need for your design.
Live update of the calculated values allows you to see the impact of the changes immediately.
Outputs velocity for both round and rectangular ducts.
PERFORM QUICK AND ACCURATE CALCULATIONS:
Enter the airflow and sizes in directly as numbers for maximum precision.
- or -
Use the airflow and size sliders for quick calculations.
Shows live equivalent round/rectangular duct sizes.
Specific dimensions can be locked to allow specific what-ifs to be quickly calculated.
Works for both IP and SI units.
You can select from a range of duct roughness categories.
Designed to allow quick calculations anywhere, anytime, it is ideal for the HVAC designer or contractor.
HOW TO USE:
Locking Dimensions:
The lock symbols to the right of the duct dimensions indicate if that particular dimension is locked when calculating new equivalent values when a dimension is updated.
The Diameter can be locked or unlocked.
The Width or Height can be locked, but not both.
Using the Sliders:
Move the sliders for Airflow, Duct Diameter, Width and Height up and down to match the desired duct size to calculate velocity and pressure drop for.
The Diameter, Width and Height will change such that the equivalent size is shown:
Changing the diameter will updated either the equivalent Width or the Height, depending on which dimension is unlocked.
Changing the Width or Height will update the equivalent Diameter if it is unlocked, or the other rectangular duct dimension of the Diameter size is locked.
Direct Entry:
The values for Airflow, Diameter, Width and Height can be directly edited in the text boxes to allow quick entry of exact numbers.
Invalid entries will generate an error message, and must be corrected prior to the calculations updating.
Output:
The values for the calculated Velocity for Round Duct and Rectangular Duct are shown, as is the Pressure Drop per Length value.
NOTES:
This application (App) is provided for use by qualified HVAC engineers and designers in the design of air handling systems and is not a substitute for appropriate design services.
When in doubt, contact a design professional.
このアプリはiPhone、iPadの両方に対応しています。
カテゴリー
ユーティリティ
ユーティリティ
リリース
2016/4/5
2016/4/5
更新
2021/4/23
2021/4/23
バージョン
1.5.2
1.5.2
言語
サイズ
8.7 MB
8.7 MB
条件
このバージョンの新機能
Bug fixes and improvements.
Bug fixes and improvements.
スクリーンショット - iPhone | iPad
スクリーンショット - iPhone | iPad
Pheinex, LLC の他のアプリ » もっと見る
» 目的別iPhoneアプリ検索
- 辞書 » 日本語対応の辞書 » 英和辞典
- 学習 » 英単語 » 英会話 » クイズで楽しく
- スケジュール » 管理 » Googleカレンダー
Simeji - 日本語文字入力&きせかえ・顔文字キーボード
Baidu Japan Inc.無料Google アプリ
Google LLC無料Chrome - Google のウェブブラウザ
Google LLC無料Clipbox
VIGROS, LIMITED LIABILITY CO.無料My au
KDDI CORPORATION無料flick(フリック)- みんなの顔文字キーボードから名前が..
IO Inc.無料SmartSearch from Yahoo!検索
Yahoo Japan Corp.無料ヤマダ電機 ケイタイde安心
BIPROGY Inc.無料通信量チェッカー
InnoX Co.,Ltd.無料無料QRこーど りーだー:QRコード&バーコード リーダー読..
MixerBox Inc.無料
CatchApp新着アプリレビュー
様々な楽しみ方で運転士として成長していく鉄道運転士育成RPG「プラチナ・トレイン(プラトレ) 日本縦断てつどうの旅」
2016-05-17 00:00
日本語にはない英語発音のリスニングを楽しく学べる「発音どっち?英語リスニング 」
2014-12-20 12:00
指先の瞬発力が試されるカジュアルゲーム「早撃ちパニック」をリリース!
2014-12-08 15:21
新着アプリ動画