このアプリのYoutube動画がある場合はURLを送信してください。詳細 »
APPLICATION INFO - iPhoneアプリの詳細情報
iCircuit is the premier iPad and iPhone app for designing and experimenting with circuits and Arduinos. Its advanced simulation engine can handle both analog and digital circuits and features realtime always-on analysis. It is the perfect companion to students, hobbyists, and engineers.
You use it as you would any CAD program: you add elements, connect them together, and set their properties.
But iCircuit is unlike other CAD programs because it is always simulating. It's just like working with the real circuit. You do not stop to take a measurement or spend a lot of time configuring reports. Instead, you just play with the circuit as you normally would, with the power on!
There are over 70 elements you can use to build your circuits. The app has everything from a programmable Arduino, to simple resistors, to switches, to MOSFETS, to digital gates.
The app features a multimeter that you use to probe around the circuit to instantly read voltages and currents. If you want to see how a value changes over time, then you can add values to the built-in oscilloscope. The scope can simultaneously track many signals over time and features a touch interface to control the total time displayed and stacked and unstacked modes to easily compare signals. The scope can also display the Fourier transform of any signal so that you can see the performance of filters.
Supported elements include:
• Programmable Arduino using a subset of the C programming language
• Signal generators, Voltage sources, Current sources, and Dependent sources
• Resistors, Capacitors, and Inductors
• Manual SPST/SPDT and DPST/DPDT Switches, Push buttons, and Relays
• LEDs, Diodes, BJ Transistors, and MOSFETs
• Audio simulation with Speakers, Microphones, Buzzers, DC Motors, and LEDs
• ADCs, and DACs
• Logic gates: AND, OR, NAND, NOR, XOR
• JK and D Flip-flops
• 38 7400 series digital parts
• 78xx and LM317 voltage regulators
• 7-segment display and driver
• Antenna with simulated AM and FM signals
You can also create sub circuits to introduce new elements and componentize your designs.
No matter your skill set, you'll be playing with circuits in no time with iCircuit.
You use it as you would any CAD program: you add elements, connect them together, and set their properties.
But iCircuit is unlike other CAD programs because it is always simulating. It's just like working with the real circuit. You do not stop to take a measurement or spend a lot of time configuring reports. Instead, you just play with the circuit as you normally would, with the power on!
There are over 70 elements you can use to build your circuits. The app has everything from a programmable Arduino, to simple resistors, to switches, to MOSFETS, to digital gates.
The app features a multimeter that you use to probe around the circuit to instantly read voltages and currents. If you want to see how a value changes over time, then you can add values to the built-in oscilloscope. The scope can simultaneously track many signals over time and features a touch interface to control the total time displayed and stacked and unstacked modes to easily compare signals. The scope can also display the Fourier transform of any signal so that you can see the performance of filters.
Supported elements include:
• Programmable Arduino using a subset of the C programming language
• Signal generators, Voltage sources, Current sources, and Dependent sources
• Resistors, Capacitors, and Inductors
• Manual SPST/SPDT and DPST/DPDT Switches, Push buttons, and Relays
• LEDs, Diodes, BJ Transistors, and MOSFETs
• Audio simulation with Speakers, Microphones, Buzzers, DC Motors, and LEDs
• ADCs, and DACs
• Logic gates: AND, OR, NAND, NOR, XOR
• JK and D Flip-flops
• 38 7400 series digital parts
• 78xx and LM317 voltage regulators
• 7-segment display and driver
• Antenna with simulated AM and FM signals
You can also create sub circuits to introduce new elements and componentize your designs.
No matter your skill set, you'll be playing with circuits in no time with iCircuit.
このアプリはiPhone、iPadの両方に対応しています。
カテゴリー
仕事効率化
仕事効率化
リリース
2010/7/30
2010/7/30
更新
2020/4/24
2020/4/24
バージョン
1.11.2
1.11.2
言語
英語
英語
サイズ
153.4 MB
153.4 MB
条件
iPhone 3GS、iPhone 4、iPhone 4S、iPhone 5、iPod touch(第3世代)、iPod touch (第4世代)、iPod touch (第5世代)、およびiPad
iPhone 3GS、iPhone 4、iPhone 4S、iPhone 5、iPod touch(第3世代)、iPod touch (第4世代)、iPod touch (第5世代)、およびiPad
このバージョンの新機能
• Fix relays and other complex elements when used in subcircuits
• Add IEC capacitor symbols
• Add 3.3 V Arduino option
• Add support for `sizeof`, `continue`, and `break` in C code
• Improve the scope stats to update more regularly
• Fix the alignment of
• Fix relays and other complex elements when used in subcircuits
• Add IEC capacitor symbols
• Add 3.3 V Arduino option
• Add support for `sizeof`, `continue`, and `break` in C code
• Improve the scope stats to update more regularly
• Fix the alignment of
スクリーンショット - iPhone | iPad
スクリーンショット - iPhone | iPad
Krueger Systems, Inc. の他のアプリ » もっと見る
» 目的別iPhoneアプリ検索
- 辞書 » 日本語対応の辞書 » 英和辞典
- 学習 » 英単語 » 英会話 » クイズで楽しく
- スケジュール » 管理 » Googleカレンダー
Microsoft Excel
Microsoft Corporation無料Microsoft Word
Microsoft Corporation無料Microsoft PowerPoint
Microsoft Corporation無料QRコードリーダー for iPhone
Takashi Wada無料QRコードリーダー for iPhone - 無料で使えるQ..
無料Gmail - Googleのメール
Google LLC無料Lifebear カレンダーと日記とToDoを無料でスケジュ..
Lifebear inc.無料Dropbox
Dropbox, Inc.無料無料QRコードリーダー・バーコードリーダー-アイコニット
MEDIASEEK Inc.無料Google ドライブ - 安全なオンライン ストレージ
Google LLC無料
CatchApp新着アプリレビュー
様々な楽しみ方で運転士として成長していく鉄道運転士育成RPG「プラチナ・トレイン(プラトレ) 日本縦断てつどうの旅」
2016-05-17 00:00
日本語にはない英語発音のリスニングを楽しく学べる「発音どっち?英語リスニング 」
2014-12-20 12:00
指先の瞬発力が試されるカジュアルゲーム「早撃ちパニック」をリリース!
2014-12-08 15:21
新着アプリ動画